Bronze with graphite solid-lubricating bearing TSB-09GSTRUCTURE: Bronze bearings made of CuSn8 with graphiteMICROSECTION:   CuSn8 with graphite (Sn:8%,Website:http://www.jxtisen.com, P<0.05%, Cu:Rest)TECHNICAL DATA:Max. Load PStatic120 N/mm2Dynamic40 N/mm2Max. sliding speed V(m/s)2.5 m/sMax. PV factor (N/mm2.m/s)2.8 N/mm2.m/sOperating TemperatureMax. Greased150°C  Max. Oil lubricated250°C Coefficient of friction0.03~0.10μSurface roughness (Ra)≤0.8 µmSurface hardnessNormal>200 HBFor longer service life>350 HBCHARACTERISTICS:Bearing material CuSn8 made of solid bronze strip with graphite for lubricated applications.Good wear resistance, suitable for rough conditions.Optimum performance under relatively high loads and low speeds.These solid lubricants into the diamond shaped lubrication indents on the bearing surface, which will offer good friction at the start and process works and keep good condition even no oil giving at short time.TYPICAL APPLICATIONS: Bronze with graphite solid-lubricating bearing TSB-09G is applied in starting motor hoisting machines and other construction machines, automobiles, tractors, trucks, machines tools and some mineral engines, gears etc.